Contact：Mr.Liu
Phone：18965151681
Tel：0592-6581808
Fax：0592-3133328
Email：1303808851@qq.com
Address：Xiamen City
News Home > News > Industry news
The characteristics of aluminum-plastic plate and installation considerations
Category：Industry news Publish：2014-05-26 11:17:26 View：769次
[Back]
&Nbsp; aluminium composite panel is a nascent new decorative materials indoor and outdoor in the country, at present, many brands on the market, a mixed bag, unevenness in the quality of the product and because of its special construction, consumers are generally more difficult to distinguish product quality, for which we have the responsibility to remind the consumer at the time of purchase and use of aluminum-plastic Board, pay attention to the following method:
1) aluminium composite panel surfaces smooth, ripple, bubble-free, Kinabalu, scratches.
2) measured aluminum composite panel is to meet international requirements, interior wall Board 3mm, wall panel 4mm.
3) fold a corner of the aluminum-plastic composite panel, easy to break not PE material doping or fake.
4) burning aluminium composite panel material, PE really burning, burned fake doped with impurities.
5) when bending plane slot, front breaks.
6) drop of butanone identification plate for exterior wall fluorocarbon coatings, drops of p-xylene identification plates for interior wall coating, 5 minutes off the Starter Kit to see if Bush.
[Installation notes]:
1) protective film protective film protective property is made up of black and white double layer polyethylene. During the installation process, to protect the plate surface is scratch or sticky mud, do not pull the protective film. Under normal weather conditions, pull the protective film in six months, adhesive transfer does not occur and cause other damage to the Board. Construction done, remove protective film best in a timely manner.
2) coating direction can cause a slight metallic colors, flashing the chromatic aberration color and stone series of aluminum-plastic composite panel installation, must be installed in the direction marked on the protective film, or chromatic aberration due to installation direction is inconsistent.
3) plasticizers can cause differences do not gloss PVC tapes, polyurethane sealants and modified silicone paste on the aluminum-plastic plate protective film, because the plasticizers contained in these materials will penetrate the protective film, resulting in change of gloss coated.
1) aluminium composite panel surfaces smooth, ripple, bubble-free, Kinabalu, scratches.
2) measured aluminum composite panel is to meet international requirements, interior wall Board 3mm, wall panel 4mm.
3) fold a corner of the aluminum-plastic composite panel, easy to break not PE material doping or fake.
4) burning aluminium composite panel material, PE really burning, burned fake doped with impurities.
5) when bending plane slot, front breaks.
6) drop of butanone identification plate for exterior wall fluorocarbon coatings, drops of p-xylene identification plates for interior wall coating, 5 minutes off the Starter Kit to see if Bush.
[Installation notes]:
1) protective film protective film protective property is made up of black and white double layer polyethylene. During the installation process, to protect the plate surface is scratch or sticky mud, do not pull the protective film. Under normal weather conditions, pull the protective film in six months, adhesive transfer does not occur and cause other damage to the Board. Construction done, remove protective film best in a timely manner.
2) coating direction can cause a slight metallic colors, flashing the chromatic aberration color and stone series of aluminum-plastic composite panel installation, must be installed in the direction marked on the protective film, or chromatic aberration due to installation direction is inconsistent.
3) plasticizers can cause differences do not gloss PVC tapes, polyurethane sealants and modified silicone paste on the aluminum-plastic plate protective film, because the plasticizers contained in these materials will penetrate the protective film, resulting in change of gloss coated.
